Wednesday, July 1, 2009

VIO Commands



VIO Server Commands


lsdev –virtual (list all virtual devices on VIO server partitions)
lsmap –all (lists mapping between physical and logical devices)
oem_setup_env (change to OEM [AIX] environment on VIO server)

Create Shared Ethernet Adapter (SEA) on VIO Server


mkvdev –sea{physical adapt} –vadapter {virtual eth adapt} –default {dflt virtual adapt} –defaultid {dflt vlan ID}
SEA Failover
ent0 – GigE adapter
ent1 – Virt Eth VLAN1 (Defined with a priority in the partition profile)
ent2 – Virt Eth VLAN 99 (Control)
mkvdev –sea ent0 –vadapter ent1 –default ent1 –defaultid 1 –attr ha_mode=auto ctl_chan=ent2
(Creates ent3 as the Shared Ethernet Adapter)

Create Virtual Storage Device Mapping


mkvdev –vdev {LV or hdisk} –vadapter {vhost adapt} –dev {virt dev name}
Sharing a Single SAN LUN from Two VIO Servers to a Single VIO Client LPAR
hdisk = SAN LUN (on vioa server)
hdisk4 = SAN LUN (on viob, same LUN as vioa)
chdev –dev hdisk3 –attr reserve_policy=no_reserve (from vioa to prevent a reserve on the disk)
chdev –dev hdisk4 –attr reserve_policy=no_reserve (from viob to prevent a reserve on the disk)
mkvdev –vdev hdisk3 –vadapter vhost0 –dev hdisk3_v (from vioa)
mkvdev –vdev hdisk4 –vadapter vhost0 –dev hdisk4_v (from viob)
VIO Client would see a single LUN with two paths.
spath –l hdiskx (where hdiskx is the newly discovered disk)
This will show two paths, one down vscsi0 and the other down vscsi1.





VIO command from HMC
#viosvrcmd -m -p -c "lsmap -all

(this works only with IBM VIO Server)

see man viosvrcmd for more information

No comments: